1 oz Copper Foil (1.4 mil) coated with an acrylic adhesive. Tape is wound up on a white 66# paper release liner.
Features & Benefits:
1 oz. Rolled Copper Foil provides excellent solderability and conformity. Product is coated with an aggressive Acrylic Adhesive system which creates a superior bond. Annealed and non-tarnishing.
Cable wrapping to provide EMI/RFI shielding of small electromagnetic components (transformer and reactor coils, instrument and control motors); repair and modification of printed wiring boards; flat conductor assemblies, prototype wiring board design and layout; supplementary shielding of joints, seams; for shielding cable slices and cable repair.
|Backing||1 oz Rolled Copper Foil (1.4 mil)|
|Tape Thickness||3.5 mil without liner|
|Adhesion to Steel||40 oz/inch|
|Tensile Strength||25 lb./inch|
|Operating Temperature||Class F (155°C)|
|Flammability||File #E130121, UL 510, Section 4|
Also known as: Also known as: non conductive metal tape, non conductove metal tape, CFL5A, CFL-5A, non conductive tape, non conductove tape, copper foil tape, copper foil tapes, copper tape, copper tapes, non conductive copper foil tape.
Alternative to: 3M #1194; Permacel # P-389; Chomerics #CCH301; Venture #1650; Saint-Gobain #C661; Lamart #881; Bondec #CF23CD.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
If you need assistance when ordering: Call Us at (877) 284-4781.
Posted by Unknown on 21st Jun 2014
Nice for use with crafts. Not very thick so you need to be careful not have ridges when applying.
All prices are in USD