2 mil dead soft premium grade Aluminum Foil coated with an extremely aggressive synthetic rubber adhesive that provides a tight positive grab when smoothed down on work surfaces; removable paper liner, total thickness 3.6 mil without liner. Used in fiberglass duct board systems on seams & joints to maintain the integrity of the vapor barrier. Can also be used on FSK systems. Malleable foil conforms well to irregular & curved surfaces.
|Total tape thickness (without liner)||3.6 mil|
|Peel adhesion||90 oz/in|
|Tensile strength||17.8 lbs/in|
|Temperature range||-4°F to 176°F|
|3” neutral core|
47.25” (1200mm) x 1000M (1093yd) Master Jumbo Rolls Available.
Alternative to Ideal #488; Polyken #337; Venture #3530; Shurtape #AF973; Fasson #0802; Tesa #53900.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
If you need assistance when ordering: Call Us at (877) 284-4781.