Teflon Coated Glass Fabric Tape 10 Mil -
Zoom the image with the mouse

PTFE Coated Glass Fabric Tape 10 Mil (78110)

PTFE Coated Glass Fabric Tapes

PTFE impregnated fiberglass cloth, consisting of warp and fill yarns, and coated with a high temperature silicone adhesive. Excellent electrical, mechanical and chemical properties. Used as a primary insulation in a variety of electrical equipment and heat sealing bars, chute liners, gaskets, bearing surfaces, tabletop covers, guide rails and roll covers. Low friction surface; abrasion resistant. Product comes standard with liner. Self-wound is optional at no additional cost. PTFE coated glass fabrics (without adhesive) are also available. Roll size of “NA”: 37-1/2” wide x 36 yd or 18 yd lengths. Call for pricing. 1/2” AND 3/4” WIDE ROLLS MUST BE SELF WOUND. Operating temperature range: -100°F to +500°F (-73°C to +260°C). 3” plastic core.


Physical Properties:

Backing   9.1 mil/0.0091”
Total thickness   0.0121”
Breaking strength, Warp/fill (lb/in)   290/180
Peel strength (oz/in)   60
Elongation, Warp/fill   4.0%/3.4%
Electrical strength (total volts)   8000

Alternative to 3M #5454; DeWal #134-10; St. Gobain #SG25-10; Greenbelt #100-10S; W.F. Lake #L-40S-10; Taconic #6085-10; Chemfab #350-10S; Lanmar #635-0; AFC #25010S

Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.

Show More Show Less
5.00 LBS
Item Price:
Select Your Options
Item Length:
Select Your Options
Total Items:
Select Your Options
Liner: *
Width: *
Pack Size: *
$42.00 Select All Required Options
Free U.S. Shipping Available
Total: $42.00 Select All Required Options

Physical Properties

Shipping and Returns

All non-specialty unused and unopened items received within 30 days may be returned for a full refund or exchange of the product. Tape Jungle will also pay for the return shipping if returned due to company error or product defect.

A 15% restocking fee will apply to converted items, sizes that are listed on the website but cut specifically to order. Custom orders, as defined as application-specific sizes that are NOT listed on the website are non-returnable without prior approval except in the event of company error.

If unsure of the policy, confirm prior to placing your order or request a sample.