Polyethylene Film Tape 9.0 Mil Rubber
5.5 mil Low density polyethylene film tape coated on one side with a synthetic rubber adhesive remains permanently tacky and bonds well to most surfaces over a wide range of temperatures; excellent low temperature bond. Tough polyethylene backing offers good abrasion and tear resistance. Highly conformable, waterproof and resistant to chemical deterioration. 3” paper core.
Ideal for polyethylene spicing; patching/repairing poly sheeting used in boating and RV industry; surface protection & electroplate masking; wire identification; packaging; etc. Works well in most applications where a low thread count polyethylene coated cloth tape is being used.
|Total Thickness || ||9.0 mil (0.229mm) |
|Film Thickness || ||5.5 mil |
|Adhesive || ||Synthetic Rubber |
|Tensile Strength || ||22 lbs/in |
|Elongation || ||100% |
|Peel Adhesion || ||70 oz/in |
|Adhesion to Backing || ||35 oz/in |
7 COLORS AVAILABLE: Clear, white, red, black, green, yellow & blue.
Alternative to 3M #481, Berry Plastics #827; Scapa #136; PATCO #5400; Shurtape #VP555; Cantech #278.
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.