Polyethylene Film Tape 5.5 Mil
Low density polyethylene film tape. Acrylic and rubber adhesive. Highly conformable. Good abrasion and chemical resistance. Outstanding moisture barrier properties. Acrylic based pressure sensitive adhesive system provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. UV resistant. Excellent long term aging stability without yellowing. Will not crack or crease at low temperatures. 3” plastic core.
Water filter purification pipe wrap, protective sealing, splicing, seaming and patching where a highly conformable and optically clear material is required.
|Total Thickness || ||5.5 mil (0.14mm) |
|Tensile strength || ||11 lbs/in. width |
|Adhesive || ||Synthetic Rubber |
|Elongation (at break) || ||400% |
|Adhesion to steel || ||56 oz/in. |
|Operating temperature rangen || ||50°F to +120°F |
8 COLORS AVAILABLE: Optically clear, black, green, orange, red, blue, white & yellow.
Alternative to 3M #480; Patco 502A, 503A .
Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.