Polyethylene Film Tape 4.5 Mil 60 Yd - Wholesale Prices from
Zoom the image with the mouse

Polyethylene Film Tape 7 Mil Rubber (63507)

Polyethylene Film Tape 7.0 Mil is a 7.0 mil low density polyethylene film tape coated on one side with a synthetic rubber based adhesive.


Its adhesive system remains permanently tacky and bonds well to most surfaces over a wide range of temperatures; with excellent low temperature bond. Its tough polyethylene backing offers good abrasion and tear resistance. It is highly conformable, waterproof and resistant to chemical deterioration. Tape has good tear characteristics.


  • Wire identification
  • Surface protection
  • Seaming and splicing of films



4.5 mils (0.114 mm) Low Density Polyethylene Film


2.5 mils (0.064 mm) Synthetic Rubber

Total Thickness (excludes liner)

7.0 mils (0.178 mm)

Peel Adhesion

60 oz/inch

Adhesion to Backing

35 oz/inch

Tensile Strength

18 lbs/inch



Minimum Application Temperature


Available Colors (4)

Clear, Black, White & Red


Tape should be stored in a cool, dry area at temperatures of up to 75°F.

Alternative to Scapa #135.

Note: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.

Show More Show Less
30.00 LBS
Item Price:
Select Your Options
Item Length:
Select Your Options
Total Items:
Select Your Options
Size: *
Color: *
$226.00 Select All Required Options
Free U.S. Shipping Available
Total: $226.00 Select All Required Options

Physical Properties

Shipping and Returns

All non-specialty unused and unopened items received within 30 days may be returned for a full refund or exchange of the product. Tape Jungle will also pay for the return shipping if returned due to company error or product defect.

A 15% restocking fee will apply to converted items, sizes that are listed on the website but cut specifically to order. Custom orders, as defined as application-specific sizes that are NOT listed on the website are non-returnable without prior approval except in the event of company error.

If unsure of the policy, confirm prior to placing your order or request a sample.